View source for Hytera/PDC760 ← Hytera/PDC760

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

Templates used on this page:

Return to Hytera/PDC760.

Retrieved from "https://wiki.brandmeister.network/index.php/Hytera/PDC760"
Hytera-Pdc760.jpg
Hytera PDC760
Vendor Hytera
Model PDC760
Firmware V1.5
Website unspecified
Self care Hytera
Terminal support
Group call Yes Voice call Yes
SMS Yes IP Yes
GPS Yes ARS/RRS No
PoC Yes



Introduction[edit]

File:BM-FH2018.pdf

Bugs[edit]


Codeplug (firmware <= 2.1)[edit]

Configuration guidelines

GPS settings (firmware <= 2.1)[edit]

Permission settings at the radio:
PDC760-GPS-Permissions.jpg


You have to configure APRS interval setting at the self-care to enable timed location update: APRS-Settings.jpg

Connectivity on firmware 2.6+[edit]

Since firmware version 2.5 Hytera fully changed protocol stack used to connect RoIP. We added support of new protocol at BrandMeister Core 20190919. If you are using firmware 2.5+ please make sure that the master you connecting to has proper version and configured to accept new type of connections. BrandMeister support both connection protocols for versions pre 2.5 and 2.5+ as two separate implementations of protocol stack. Usually both used the same connection port.

Firmware 2.6 has bug which prevent a device from connection when hostname configured as end-point for PoIP. In case of firmware 2.6 please use numerical IP address instead.

PDC-26-0.jpg

Group affiliation on firmware 2.6+[edit]

Firmware 2.6+ supports subscription to multiple groups on 2.6+ on another way. Please check pictures bellow.

PDC-26-1.jpg

PDC-26-2.jpg

PDC-26-3.jpg

PDC-26-4.jpg