BrandMeisterDifference between revisions of "WIRES-X"
(→Silent call from Fusion operator) |
(→Limitations) |
||
| Line 20: | Line 20: | ||
=== Limitations === | === Limitations === | ||
* Room should be run in digital only mode | * Room should be run in digital only mode | ||
| − | |||
| − | |||
* BrandMeister server requires registered node ID and Call-Sign at Yaesu WIRES-X System (these credentials should not be used by any node or you should grant that node with these credentials will never be connected to required rooms) | * BrandMeister server requires registered node ID and Call-Sign at Yaesu WIRES-X System (these credentials should not be used by any node or you should grant that node with these credentials will never be connected to required rooms) | ||
Revision as of 17:50, 28 September 2020
Starting BrandMeister release 20160421-112227 has support of WIRES-X connectivity.
WIRES-X Link allows:
- To make bridges between DMR talking groups and WIRES-X rooms
- Transfer voice calls between BrandMeister Network and WIRES-X network with audio quality 1:1 and signaling conversion
Contents
Benefits
- Fully transparent calls between DMR and WIRES-X
- Full call signaling support in both directions
- Sound quality is 1:1 in both directions
- No extra hardware is required(*)
- Late call entry is supported on both sides in both directions
- System Fusion / WIRES-X side doesn’t loose any features
- Each BrandMeister Server can be connected to several rooms
Conceptual view
Limitations
- Room should be run in digital only mode
- BrandMeister server requires registered node ID and Call-Sign at Yaesu WIRES-X System (these credentials should not be used by any node or you should grant that node with these credentials will never be connected to required rooms)
Additional features
- CLI-based support of chat for WIRES-X administrators:
- Incoming messages are available via syslog
- D-BUS API to send messages
- Additional CLI utility SendWiresXMessage.php (not supplied to distribution)
- WIRES-X directory service (ILS) client can be implemented as external utility
- D-BUS API to connect rooms including support of rooms behind UPnP NAT
- WIRES-X directory service client is not in scope of project for now
Allocated ports
- UDP 46110
- UDP 46112
Configuration
WiresXLink :
{
// DTMF ID of local node
number = NODE ID;
// Call of local node
call = "<CALL-ND>";
// Connection profiles
connections =
[
"RoomXXXXX",
"RoomXXXXX"
];
};
RoomXXXXX :
{
// Room ID: ITALY
// Group ID
number = TG number;
// Remote node address
address = <"IP ADRESS or Domain Name">;
// Connection mode:
// 0 - Regular
// 1 - Persistent
mode = 0;
};
Issues with connectivity
No sound from WIRES-X at all, BM Status web page shows “0 members”
Check your firewall rules, port UDP 46112 should be allowed.
DMR radio (and Last Heard) shows talking group number instead ID of operator
- Operator has not registered his call-sign in CCS7 registration system - ask him to register
- CRC check failed during processing of SystemFusion