(→Configuration) |
(→Limitations) |
||
| Line 17: | Line 17: | ||
* Digest / MD5 authentication is supported (username equals to connection profile ID), but in case of Hytera's equipment doesn't work (Hytera's bug) | * Digest / MD5 authentication is supported (username equals to connection profile ID), but in case of Hytera's equipment doesn't work (Hytera's bug) | ||
* Connection profile ID is used as contact name | * Connection profile ID is used as contact name | ||
| + | * To pass traffic between AIS node/network and BrandMeister Network please use standard way of bridge configuration and register a talkgroup in space AISSubscriptions (see bellow) | ||
== Configuration == | == Configuration == | ||
Since version BrandMeister Core 20211222-205035 has support of DMRA AIS.
DMR Application Interface by DMR Association is a general-use IP-based interface for DMR applications and interworking. It is quite abstract and allows vendor's specific deviations. Also it is a bit slow due to complicated procedures (for example, call setup).
During the implementation we tried to provide flexibility of connector. To follow that approach most of specific procedures, such as registration business-logic are moved to Lua code of Registry. On this way, for example, you are able to register all subscribers of BrandMeister Network in an interconnected DMR Tier 3 network.
BrandMeister
AISConnect :
{
port1 = 5060; // SIP Port
port2 = 45000; // Start RTP Port (will use many)
count = 20; // Count of ports to receive RTP (equals to amount of allowed concurrent calls per connection)
latency = 200; // Latency of jitter buffer (100-800 ms)
// Connection profiles
connections =
[
"AISProfile1"
];
};
AISProfile1 :
{
// Network ID of remote system
number = 25010;
// Connection mode:
// Bit 0 - Allow to update terminal location in all registries
// Bit 1 - Allow to subscribe a group in embedded registry
mode = 3;
// Address and port of endpoint
address = "ais.domain.net";
port = 5060;
// Incoming REGISTER request
interval = 300; // Registration timeout
};
Space AISSubscriptions - used to send registration requests to AIS node:
1 - AIS Profile ID
2 - Group ID
3 - Slot
4 - Expiration Time
Since version BrandMeister Core 20211222-205035 has support of DMRA AIS.
DMR Application Interface by DMR Association is a general-use IP-based interface for DMR applications and interworking. It is quite abstract and allows vendor's specific deviations. Also it is a bit slow due to complicated procedures (for example, call setup).
During the implementation we tried to provide flexibility of connector. To follow that approach most of specific procedures, such as registration business-logic are moved to Lua code of Registry. On this way, for example, you are able to register all subscribers of BrandMeister Network in an interconnected DMR Tier 3 network.
AISConnect :
{
port1 = 5060; // SIP Port
port2 = 45000; // Start RTP Port (will use many)
count = 20; // Count of ports to receive RTP (equals to amount of allowed concurrent calls per connection)
latency = 200; // Latency of jitter buffer (100-800 ms)
// Connection profiles
connections =
[
"AISProfile1"
];
};
AISProfile1 :
{
// Network ID of remote system
number = 25010;
// Connection mode:
// Bit 0 - Allow to update terminal location in all registries
// Bit 1 - Allow to subscribe a group in embedded registry
mode = 3;
// Address and port of endpoint
address = "ais.domain.net";
port = 5060;
// Incoming REGISTER request
interval = 300; // Registration timeout
};
Space AISSubscriptions - used to send registration requests to AIS node:
1 - AIS Profile ID
2 - Group ID
3 - Slot
4 - Expiration Time