(→Configuration) |
(No difference)
|
Auria DVMEGA | |||
---|---|---|---|
Vendor | Auria | ||
Model | DVMEGA | ||
Firmware | 3.26 | ||
Website | http://dvmega.auria.nl | ||
Retail price | €85 - €135 | ||
Modes | |||
DMR | dPMR | ||
C4FM | D-Star | ||
Tetra | APCO P25 | ||
Terminal support | |||
Group call | Voice call | ||
SMS | IP | ||
GPS | ARS/RRS |
The DV-MEGA is a family of add-on boards (shields) for Arduino Uno, Arduino MEGA and Raspberry Pi for several digital voice communication standards.
DV-MEGA is produced by Guus van Dooren PE1PLM, http://www.dvmega.auria.nl/
The dualband (VHF/UHF) version
Currently the following DV modes are supported:
To utilize the DVMega hotspot, a transceiver capable of the selected DV mode is necessary to operate as the hotspot only provides a gateway into the selected infrastructure. The DV-MEGA has only one time slot.
Private call
[General] Callsign=M7WMW (Enter Your Call Sign Here) Timeout=10 (There are people who tend to talk more than 3 minutes continuous, so do not set this to tight, say 6 minutes.) Duplex=0 (Set this to zero as this is a simplex device) ModeHang=10 Display=None Daemon=0 [Info] # If frequencies higher than 440 don't work on your board, you need to update the firmware. RXFrequency=438800000 (Set your receive frequency here in this format.) TXFrequency=438800000 (Set to the same as your receive frequency in this format.) Power=1 (THIS VALUE IS REQUIRED FOR DVMega's) Latitude= 53.5338 (THIS VALUE IS REQUIRED FOR DVMega's) Longitude=-2.5316 (THIS VALUE IS REQUIRED FOR DVMega's) Height=60 (THIS VALUE IS REQUIRED FOR DVMega's) Location=Mobile (Location Varies) Description=Multi-Mode Hotspot URL=www.qrz.com/db/yourcallsign [Log] # Logging levels, 0=No logging DisplayLevel=2 FileLevel=2 FilePath=. FileRoot=MMDVM [CW Id] Enable=0 Time=10 [Modem] Port=/dev/ttyAMA0 TXInvert=1 RXInvert=1 PTTInvert=0 TXDelay=100 DMRDelay=0 RXLevel=50 TXLevel=50 OscOffset=0 Debug=0 [DMR] Enable=1 Beacons=0 Id=2407229(Set to your DMR ID, a separate ID is NOT required.) ColorCode=1 (Chose any color code.) SelfOnly=0 # Prefixes=234,235 LookupFile=DMRIds.dat TXHang=0 (Set to zero as this is a simplex device.) [DMR Network] Enable=1 Address=3102.repeater.net (3101.repeater.net, 3102.repeater.net, 3103.repeater.net, 3108.repeater.net-(experimental server) CHOOSE THE SERVER WITH LOWEST PING Port=62031 Password=passw0rd Slot1=0 (YOU MUST DISABLE THIS TIMESLOT AS THIS IS A SIMPLEX DEVICE.) Slot2=1 Debug=0
Three different hardware configurations of DV-MEGA are currently available:
This is a list of ready to use SD-Card images. Please append your URL.
Auria DVMEGA | |||
---|---|---|---|
Vendor | Auria | ||
Model | DVMEGA | ||
Firmware | 3.26 | ||
Website | http://dvmega.auria.nl | ||
Retail price | €85 - €135 | ||
Modes | |||
DMR | dPMR | ||
C4FM | D-Star | ||
Tetra | APCO P25 | ||
Terminal support | |||
Group call | Voice call | ||
SMS | IP | ||
GPS | ARS/RRS |
The DV-MEGA is a family of add-on boards (shields) for Arduino Uno, Arduino MEGA and Raspberry Pi for several digital voice communication standards.
DV-MEGA is produced by Guus van Dooren PE1PLM, http://www.dvmega.auria.nl/
The dualband (VHF/UHF) version
Currently the following DV modes are supported:
To utilize the DVMega hotspot, a transceiver capable of the selected DV mode is necessary to operate as the hotspot only provides a gateway into the selected infrastructure. The DV-MEGA has only one time slot.
Private call
[General] Callsign=M7WMW (Enter Your Call Sign Here) Timeout=10 (There are people who tend to talk more than 3 minutes continuous, so do not set this to tight, say 6 minutes.) Duplex=0 (Set this to zero as this is a simplex device) ModeHang=10 Display=None Daemon=0 [Info] # If frequencies higher than 440 don't work on your board, you need to update the firmware. RXFrequency=438800000 (Set your receive frequency here in this format.) TXFrequency=438800000 (Set to the same as your receive frequency in this format.) Power=1 (THIS VALUE IS REQUIRED FOR DVMega's) Latitude= 53.5338 (THIS VALUE IS REQUIRED FOR DVMega's) Longitude=-2.5316 (THIS VALUE IS REQUIRED FOR DVMega's) Height=60 (THIS VALUE IS REQUIRED FOR DVMega's) Location=Mobile (Location Varies) Description=Multi-Mode Hotspot URL=www.qrz.com/db/yourcallsign [Log] # Logging levels, 0=No logging DisplayLevel=2 FileLevel=2 FilePath=. FileRoot=MMDVM [CW Id] Enable=0 Time=10 [Modem] Port=/dev/ttyAMA0 TXInvert=1 RXInvert=1 PTTInvert=0 TXDelay=100 DMRDelay=0 RXLevel=50 TXLevel=50 OscOffset=0 Debug=0 [DMR] Enable=1 Beacons=0 Id=2407229(Set to your DMR ID, a separate ID is NOT required.) ColorCode=1 (Chose any color code.) SelfOnly=0 # Prefixes=234,235 LookupFile=DMRIds.dat TXHang=0 (Set to zero as this is a simplex device.) [DMR Network] Enable=1 Address=3102.repeater.net (3101.repeater.net, 3102.repeater.net, 3103.repeater.net, 3108.repeater.net-(experimental server) CHOOSE THE SERVER WITH LOWEST PING Port=62031 Password=passw0rd Slot1=0 (YOU MUST DISABLE THIS TIMESLOT AS THIS IS A SIMPLEX DEVICE.) Slot2=1 Debug=0
Three different hardware configurations of DV-MEGA are currently available:
This is a list of ready to use SD-Card images. Please append your URL.