(Configuration)
 
m (Several Kirisun repeaters behind a single IP)
Line 13: Line 13:
  
 
== Several Kirisun repeaters behind a single IP ==
 
== Several Kirisun repeaters behind a single IP ==
Allowed count can be configured at BrandMeister configuration. In this case each repeater's port 34420 has to be exposed (forwarted) as 34420 + N, where N is sequential number from 0 up to allowed count - 1 (34420, 34421, etc).
+
Allowed count can be configured at BrandMeister configuration. In this case each repeater's port 34420 has to be exposed (forwarded) as 34420 + N, where N is sequential number from 0 up to allowed count - 1 (34420, 34421, etc).

Revision as of 19:35, 19 November 2020

Supported models

  • TR850
  • DR600

Configuration

  • Communication protocol has to be set to Custom 2
  • UDP port 34420 of repeater has to be exposed (forwarded)
  • Default master port is 10405


Kirisun1.png

Several Kirisun repeaters behind a single IP

Allowed count can be configured at BrandMeister configuration. In this case each repeater's port 34420 has to be exposed (forwarded) as 34420 + N, where N is sequential number from 0 up to allowed count - 1 (34420, 34421, etc).

Supported models[edit]

Configuration[edit]


Kirisun1.png

Several Kirisun repeaters behind a single IP[edit]

Allowed count can be configured at BrandMeister configuration. In this case each repeater's port 34420 has to be exposed (forwarted) as 34420 + N, where N is sequential number from 0 up to allowed count - 1 (34420, 34421, etc).