BrandMeister DMR Server has built-in APRS capabilities:

  • Position reports of Hytera and Motorola radios can be forwarded to APRS
  • Telemetry events of Hytera and Motorola radios can be forwarded to APRS
  • Private text messages can be sent to APRS call-signs
  • Private text messages can be received from APRS network
  • APRS Group bulletins can be received from APRS network
  • APRS queries to DMR radio

APRS Specification - http://www.aprs.org/doc/APRS101.PDF

TO-CALL

APBMxx is officially assigned to BrandMeister (http://www.aprs.org/aprs11/tocalls.txt)

  • APBMnD is in use by main software (BrandMeister DMR Server)
  • APBMnS is reserved for supplimentary services such as rpt2aprs

Configuration file

APRSGate :
{
  // APRS connection credentials
  address = "rotate.aprs.net:14580";
  call = "KA6VKP-10";
  code = "123456";
  filter = "t/m";
  // Perl Regular Expression to filter destination call-sign of incoming messages
  expression = "^(R|U[A-I]|BLN[0-9]250)";
  // Private ID
  number = 250999;
};

Standard APRS server filter has no capabilities to filter destination call-sign of text messages. Starting BrandMeister release 20160226-180235 the filter functionality for destination call-sign is implemented on-board. It uses Perl Compatible Regular Expressions (http://www.pcre.org). Please be careful the expression also affects to group bulletins. If you allow to receipt it please add BLN[0-9] to your expression.

Example of expression

^(R|U[A-I]|BLN[0-9]250)

This pattern filters all calls starting (^) from R or UA-UI or bulletins for group ID starting from 250.
Detailed expressions for countries are defined in article APRS/Filters.

Private text messages

Send message from APRS network to DMR radio

To send message to DMR radio from APRS you need to send typical APRS message to call-sign (with SSID) that is assotiated to DMR ID at self-care. Recipient will receive message of following format:

<sender call-sign in upper case> <message text>

Example:

R3ABM-12 Hello!

Delivery report

If sender APRS station will require delivery report, BrandMeister will forward DMR delivery report as normal APRS message acknowledgement

Send message from DMR radio to APRS network

To send a message from DMR radio to an APRS station you need to prepare message message of following format:

<recipient call-sign in upper case> <message text>

Example:

R3ABM-12 Hello!

The message should be addressed to APRS gateway private ID (This is the same as the destination used for GPS normal MCC999 replace MCC with the master MCC). It is recommended you setup a private contact with this ID.

Delivery report

If destination APRS station will respond with delivery status you will receive normal text message with text ack or rej.

Example:

R3ABM-12 ack

Group bulletins

BrandMeister translates APRS bulletin messages to DMR group text messages (two messages will be sent, one in Hytera TMP format and another one in Motorola TMS). Bulletin name should point to DMR group ID.

Bulletin name syntax:

BLN<1 digit bulletin ID><1-5 digits of DMR group ID>

Example:

BLN02509

This bulletin will be forwarded as text message of DMR group ID 2509.

Recipients will receive message of following format:

<sender call-sign in upper case> <bulletin name> <message text>

Example:

R3ABM-12 BLN02509 Weather alert!

Queries

  •  ?APRSP – to make single query of DMR radio location
  •  ?APRSS – to check DMR radio status

Only supported by Hytera and Motorola radios having ARS/RRS/LP/LRRP configured

BrandMeister DMR Server has built-in APRS capabilities:

APRS Specification - http://www.aprs.org/doc/APRS101.PDF

TO-CALL[edit]

APBMxx is officially assigned to BrandMeister (http://www.aprs.org/aprs11/tocalls.txt)

Configuration file[edit]

APRSGate :
{
  // APRS connection credentials
  address = "rotate.aprs.net:14580";
  call = "KA6VKP-10";
  code = "123456";
  filter = "t/m";
  // Perl Regular Expression to filter destination call-sign of incoming messages
  expression = "^(R|U[A-I]|BLN[0-9]250)";
  // Private ID
  number = 250999;
};

Standard APRS server filter has no capabilities to filter destination call-sign of text messages. Starting BrandMeister release 20160226-180235 the filter functionality for destination call-sign is implemented on-board. It uses Perl Compatible Regular Expressions (http://www.pcre.org). Please be careful the expression also affects to group bulletins. If you allow to receipt it please add BLN[0-9] to your expression.

Example of expression[edit]

^(R|U[A-I]|BLN[0-9]250)

This pattern filters all calls starting (^) from R or UA-UI or bulletins for group ID starting from 250.
Detailed expressions for countries are defined in article APRS/Filters.

Private text messages[edit]

Send message from APRS network to DMR radio[edit]

To send message to DMR radio from APRS you need to send typical APRS message to call-sign (with SSID) that is assotiated to DMR ID at self-care. Recipient will receive message of following format:

<sender call-sign in upper case> <message text>

Example:

R3ABM-12 Hello!

Delivery report[edit]

If sender APRS station will require delivery report, BrandMeister will forward DMR delivery report as normal APRS message acknowledgement

Send message from DMR radio to APRS network[edit]

To send a message from DMR radio to an APRS station you need to prepare message message of following format:

<recipient call-sign in upper case> <message text>

Example:

R3ABM-12 Hello!

The message should be addressed to APRS gateway private ID (This is the same as the destination used for GPS normal MCC999 replace MCC with the master MCC). It is recommended you setup a private contact with this ID.

Delivery report[edit]

If destination APRS station will respond with delivery status you will receive normal text message with text ack or rej.

Example:

R3ABM-12 ack

Group bulletins[edit]

BrandMeister translates APRS bulletin messages to DMR group text messages (two messages will be sent, one in Hytera TMP format and another one in Motorola TMS). Bulletin name should point to DMR group ID.

Bulletin name syntax:

BLN<1 digit bulletin ID><1-5 digits of DMR group ID>

Example:

BLN02509

This bulletin will be forwarded as text message of DMR group ID 2509.

Recipients will receive message of following format:

<sender call-sign in upper case> <bulletin name> <message text>

Example:

R3ABM-12 BLN02509 Weather alert!

Queries[edit]

Only supported by Hytera and Motorola radios having ARS/RRS/LP/LRRP configured