General requirements for repeater integration

This article is for repeater vendors

• UDP based transport (or we can develop our own agent software for repeater side to encapsulate transport)
• DMR transport may be represented on CCL or DDL level
• Beacon transmission (IDLE frames, if possible)
• Repeater diagnostics (if possible):
  • Query RX and TX frequencies, CC, linked slots
  • Model name or code, firmware version
  • Repeater ID, literal name
  • Alarms and state (for example, SNMP traps)
  • Site coordinates (if repeater has GPS receiver or configuration fields to pass position)
• Repeater management (if possible):
  • Enable / disable / query state of repeater