Czech & Slovak = BM2302
All hams are welcome from all over the world works without any limitations.
The talk groups that are available worldwide and based on the spoken language and geographic area. These talk groups may be configured as Dynamic Talk Groups in your area which are contacted by a PTT press on a group contact number. After the PTT press, the repeater transmits activity on this talk group for 10 minutes after last PTT press.
|91||Worldwide English||English Language|
|93 or 3100||North America||United States and Canada|
|95||Pacific Rim||Australia and New Zealand|
|923||English||European English Language|
These talk groups may be configured as Static Talk Group, it is a national wide
|230||National Czech||All National CZ Repeaters ( also broadcasts on Slovakia repeaters)|
|231||National Slovak||All National SK Repeaters (also broadcasts on Czech repeaters)|
|2300||Crossconect||Crossconect between Czech DMR Reflector 4270 x D-Star DCS019V x YSF x Wires-x channel (also broadcasts on TS2-TG9 on all Czech and Slovak national repeaters)|
|2301||Bohemia||Only Bohemia region Repeaters|
|2302||Moravia||Only Moravia region Repeaters|
|2309(On demand)||D-Star(B)||Czech and Slovak D-Star centre of activity DCS019B|
|2311||Slovakia||Only Slovak Repeaters|
|23010||CHAT||OnDemand - Please move here if you chat longer than 5-10 minutes!|
Following talk groups may be configured as Dynamic Talk Groups with respect to listed reflectors worldwide.These are activated by a PTT press on a relevant group number. After initial PTT press repeater then transmits activity on this talk group for 10 minutes since last activity of the group / reflector or local PTT press.
|4270||DCS019V x YSF "CZ Czech" x WiresX "Moravia"||DMR D-STAR C4FM cross-link|
|4271||TG 230||Linked to TG230 (Czech)|
|4272||TG 231||Linked to TG231 (Slovak)|
Apart from static Talk Groups(TG), dynamic TG will be created upon transmitting on this TG for first time, TG will be created on same timeslot(TS) it has been initiated. Dynamic TG will state active for either 10 minutes after last transmission has been made or received on this particular TG or it can be deleted / removed by transmitting on TG4000 on respective timeslot. If TG4000 is used on timeslot 2 it will remove all Dynamic TGs and disconnect active reflector also!!! Use with care! Someone else can be using repeater! Reflector works in simillar manner - only differencies are:
a) Reflectors only work on 2nd timeslot (TS2) via use of TG9
b) Reflectors can only have numbers of 4001 - 5000
If you connect Reflector (ie. by TXing on TS2 / TG4272) voice confirmation will be played. If you want to disconnect Reflector only BUT want to keep all other Dynamic TalkGroups still active, you can do so by transmitting on ID 4000 (PrivateCall 4000 - not TG4000)
So to sum this up -
TG4000: = all dynamic Talk Groups disconnection, including Reflector if done on TS2. PRIVATE-CALL: 4000 = Reflector disconnection (only on TS2)
On HotSpots (DV-MEGA, OpenSPOT,MMDVM) where there are no TimeSlots, same applies - TG4000 disconnects all but PrivateCall 4000 disconnect Reflector only!
- Each repeater has its own TG-230xxx = ID. For local use, set the TG of repeaters.
- If you want Your call only to one of the other repeaters, set its ID as the TG.
This is the way to configure MMDVM.ini to give access to the National BrandMeister.
|* [DMR Network]|
|* Address= *ask BM2302 sysops|
|Private Call 9990||Parrot|
|Private 230992||Actual Time delivered as SMS|
|Private 230991||PI - delivered as 60s speach (useful for testing)|
|Private 2308xx||WX Warning request - delivery via SMS|
Rozdělení krajů na TG:
|230801 Praha||231801 Bratislavský|
|230802 Jihomoravský||231802 Trnavský|
|230803 Jihočeský||231803 Trenčiansky|
|230804 Pardubický||231804 Nitriansky|
|230805 Královéhradecký||231805 Žilinský|
|230806 Vysočina||231806 Banskobystrický|
|230807 Karlovarský||231807 Prešovský|
|230808 Liberecký||231808 Košický|